ESPECIFICACIONES SUJETAS A CAMBIO SIN PREVIO AVISO.Manual del UsuarioSM2410B
power adapter is not needed. The scanner powers up, the buzzer sounds four beeps and the LED indicator glows. 4. Present a known-good test barcode
5. Setting up the Scanner In certain cases no setup is required. The scanner is either pre-programmed to suit the situation, or it automatically d
scanner is in programming mode. Decide which parameters are required and find their barcodes in the programming section. Cover unwanted codes with y
6. Operating the Scanner The scanner can read barcodes in either omnidirectional or single-line mode to accommodate different requirements. This s
¾ If the button is released, it automatically switch back to omnidirectional scan in 5 seconds. Press down again to switch to single-line scan when
6-3 LED Indications A dual color red-blue LED indicates operating status as follows: LED status Indication Off No power supplied to the scanner S
6-4 Beeps A beeper gives audible feedback on scanner operation. Beeps Indication One beep A barcode has been successfully decoded. Four beeps in
6-5 Sleep Mode After the scanner has been inactive for a period of time, the laser automatically turns off; then the motor will turn off and the sca
7. Maintaining the Scanner The scanner is designed for long-term trouble-free operation and rarely requires any maintenance. Only an occasional cle
5. Plug the new cable into the host. 6. If a power adapter is used, plug the power adapter into the jack on the interface cable. Press down here
No warranty of any kind is made in regard to this material, including, but not limited to, implied warranties of merchantability or fitness for a part
Laser Safety The laser scanner complies with safety standard IEC 60825 -1for a Class I laser produce. It also complies with CDRH as applicable to
Table of Contents Introduction...1 Unpacking...
1. Instruction The scanner is a compact hands-free omnidirectional laser scanner, and becomes a single-line laser scanner by pressing down a button.
2. Unpacking The handheld omnidirectional scanner package contains: 1 ea. Compact omnidirectional scanner 1 ea. Scanner stand 1 ea. Screw (to
3. Outline 3-1 Scanner Description Function Exit Window Reads barcodes Object Detector Trigger and wake up scanner when presenting barcode in
3-2 Stand The stands are both designed with a fixing hole, use appropriate screws enclosed in package to fix the stands on surface if necessary. Fi
4. Connecting 4-1. Power The scanner requires a minimum of 2.5W at 5 VDC power. The interface cable that comes with the scanner supports both dir
Kommentare zu diesen Handbüchern